- Fix PCs pro tips help you cut repair time and raise hourly cash income significantly.
- Diagnosis first: always scan before opening the case to avoid wasted teardowns.
- Benchmark balance matters: mismatched CPU and GPU tiers lose score and pay.
- Upgrade tools early: faster screwing and scanning saves minutes on every order.
- Stock smart: keep GPUs, RAM, and PSUs on shelves to avoid mid-order delays.
Core Repair Loop Tips Every Technician Needs
Fix PCs rewards efficiency more than anything else. The repair loop — accept, diagnose, disassemble, swap, reassemble, benchmark, deliver — repeats hundreds of times, so even small time savings per order compound into serious cash. These Fix PCs pro tips focus on shaving seconds off each stage of that loop.
Video Highlights:
- Learn the full repair loop in one place
- See diagnosis and workbench techniques in action
- Watch benchmark passes and payout collection
The single biggest beginner mistake is skipping diagnosis and guessing at the broken part. The diagnostic scan points you directly at the failing component — a dead GPU, faulty RAM, failing PSU, or just loose cables. Guessing means unnecessary teardowns, wasted minutes, and occasionally wrong-part installs that force you to redo the job.
Every repair ticket lists the customer's requirements. Installing the wrong part tier means redoing the entire job — compare installed parts against the ticket before closing the case.
| Loop Stage | Common Mistake | Pro Fix |
|---|---|---|
| Accept order | Taking any ticket regardless of payout | Filter toward premium part swaps when stocked |
| Diagnose | Guessing the fault | Always run the diagnostic scan first |
| Disassemble | Losing track of screws | Unscrew methodically, top to bottom |
| Reassemble | Half-seated cables | Confirm every connector clicks fully in |
| Benchmark | Powering on before closing up | Seat side panel and PSU switch first |
| Deliver | Leaving PCs on the bench | Deliver immediately to free bench space |
Workbench Speed Techniques
The workbench is where most of your time is spent, so it deserves the most optimization. Parts that refuse to come out almost always have a hidden screw or an attached power cable — check both before forcing anything. The same applies in reverse: a part that won't register as installed usually has a partially seated connector.
Steps run smoothly when your tools and inventory are positioned with intention. Keep your most-used parts within arm's reach of the bench, and batch similar orders together so you're not constantly cycling tools with the scroll wheel or number keys.
Stage your workspace
Restock high-demand parts near the bench before accepting a batch of orders. GPUs, RAM sticks, and PSUs move fastest.
Scan, then tear down
Run the diagnostic scan, unscrew the side panel, and go straight to the flagged component — skip unnecessary removals.
Swap and seat firmly
Install the replacement, reconnect every power and data cable, and confirm screws are fully tightened before closing up.
Benchmark immediately
Plug in, power on, and run the benchmark while the next PC is queued on your second bench.
If the PC won't power on, confirm the PSU is connected to the motherboard and that the PSU's own power switch is flipped. This one check resolves most failed power-ons instantly.
Money-Making Upgrades in the Right Order
Cash spent in the wrong order slows your entire operation. The proven priority is tools first, then a second workbench, then shelving and strategic stock. Better tools speed up screwing, unplugging, and diagnosing — a quality screwdriver and upgraded diagnostic equipment cut minutes off every single order.
1. Tools First
- Faster screws and scans
- Benefits every order forever
- Best early-game investment
2. Second Workbench
- Two PCs at once
- Benchmark one while building the other
- Doubles effective throughput
3. Shelving & Stock
- More parts stored
- Fewer restocking trips
- More simultaneous orders
Not all tickets pay equally. Orders requiring premium part swaps — flagship GPUs, high-end CPUs — pay far more than loose-cable fixes. As your stock improves, skip low-margin jobs unless you're idle.
Speed is money. Memorizing common fault patterns and batching similar orders means more completed repairs per hour — the strongest lever on your income.
Benchmark and Parts Strategy
The benchmark system grades completed builds on part tier, compatibility, and overall balance. Higher grades mean bigger rewards, so part selection matters as much as repair speed. With 192 components in the game, knowing which ones to stock — and which to skip — separates a profitable shop from a struggling one.
| Tier | Category Examples | When to Use |
|---|---|---|
| S | Flagship GPU, high-end CPU | Once affordable — highest payouts and scores |
| A | Mid-high GPU, high-capacity RAM, NVMe storage | Workhorse parts for most orders |
| B | Mid CPU, mid-wattage PSU, air coolers | Reliable budget-fill for standard jobs |
| C | Entry GPU, low-wattage PSU, small RAM | Early game only — upgrade stock quickly |
Balance beats raw power. Pair CPU and GPU tiers evenly — the benchmark penalizes unbalanced builds. And never install a low-wattage PSU with high-end parts: insufficient wattage fails the benchmark outright.
| Problem | Likely Cause | Fix |
|---|---|---|
| Part won't detach | Hidden screw or cable | Check remaining screws and connectors |
| PC won't power on | PSU not connected | Seat motherboard power, flip PSU switch |
| Benchmark fails | Loose part or weak PSU | Reseat cables, verify wattage headroom |
| Ticket won't complete | Wrong part tier | Match installed parts to ticket requirements |
High-capacity RAM is one of the cheapest upgrades with a solid benchmark return. Keep several kits in stock at all times.
Pro Habits Checklist
Adopt these habits and your hourly income climbs within a session or two. They apply from your first loose-cable fix all the way to flagship builds.
Master Technician Habits:
- Run the diagnostic scan before every teardown
- Batch similar orders to minimize tool switching
- Upgrade tools before anything else
- Keep GPUs, RAM, and PSUs stocked at the bench
- Balance CPU and GPU tiers in every build
- Deliver repaired PCs immediately to free bench space
Start with simple orders — loose cables and single-part swaps — to build cash safely, then reinvest in tools and a second workbench as soon as you can afford them. For the latest part additions and payout tuning, check the official Roblox game page and the DEVTEC STUDIOS group announcements.
FAQ
Q: What is the fastest way to earn money in Fix PCs?
Combine three tactics: prioritize high-payout orders that need premium part swaps, diagnose fast to raise turnover, and upgrade your tools early so every repair takes less time. Adding a second workbench lets you benchmark one PC while assembling another.
Q: Why does the benchmark test fail after my repair?
A failed benchmark means something is still loose or wrong. Reseat every cable and screw, confirm the PSU is connected to the motherboard with its switch flipped on, and verify the PSU has enough wattage for the installed parts — low-wattage units fail benchmarks with high-end components.
Q: Which parts should I keep in stock?
Keep a balanced inventory of high-demand components — GPUs, RAM, and PSUs — rather than hoarding niche parts. Running out of a common part mid-order kills your momentum, so restock top sellers first.
Q: Do these Fix PCs pro tips work for brand-new players?
Yes. Diagnosis-first, reading tickets before installing parts, and immediate delivery apply from your very first order. The upgrade-priority advice (tools, then benches, then stock) scales naturally as your cash grows.